Three-component N-alkenylation of azoles with alkynes and iodine(III) electrophile: synthesis of multisubstituted N-vinylazoles

• Jun Kikuchi,
• Roi Nakajima and
• Naohiko Yoshikai

Beilstein J. Org. Chem. 2024, 20, 891–897, doi:10.3762/bjoc.20.79

• catalysis encompassed various azoles such as pyrazole, indazole, and (benzo)triazole, exhibiting high Z-selectivity. In addition, Cao et al. reported a gold-catalyzed addition of 5-substituted tetrazoles to terminal alkynes [11]. Analogous hydroazolation reactions of alkynes have also been achieved under

• oxazolidinone-substituted ynamide also proved to undergo iodo(III)azolation in a regio- and stereoselective fashion to give the product 4ai in a moderate yield. Note that terminal alkynes such as phenylacetylene also took part in the reaction, albeit in a much-diminished yield (7% by 1H NMR; data not shown

Nucleophilic functionalization of thianthrenium salts under basic conditions

• Xinting Fan,
• Duo Zhang,
• Xiangchuan Xiu,
• Bin Xu,
• Yu Yuan,
• Feng Chen and
• Pan Gao

Beilstein J. Org. Chem. 2024, 20, 257–263, doi:10.3762/bjoc.20.26

• generation of alkyl radicals [39]. After that, a series of methods for the modification of alkylthianthrenium salts have been developed, including the transition-metal-catalyzed cross-coupling with terminal alkynes [40], sulfonylation with DABCO·(SO2)2 [41][42][43], or alkylation of active alkenes [44][45

Multi-redox indenofluorene chromophores incorporating dithiafulvene donor and ene/enediyne acceptor units

• Christina Schøttler,
• Kasper Lund-Rasmussen,
• Line Broløs,
• Philip Vinterberg,
• Ema Bazikova,
• Viktor B. R. Pedersen and
• Mogens Brøndsted Nielsen

Beilstein J. Org. Chem. 2024, 20, 59–73, doi:10.3762/bjoc.20.8

• the terminal alkynes afforded the macrocyclic DTF-IF-RA scaffold 23. Molecular sieves (4 Å) were added to the reaction mixture as this has previously been shown to significantly promote the Glaser–Hay coupling [28]. Compounds 20 and 21 were unfortunately very sensitive compounds that were found to

1-Butyl-3-methylimidazolium tetrafluoroborate as suitable solvent for BF₃: the case of alkyne hydration. Chemistry vs electrochemistry

• Marta David,
• Elisa Galli,
• Richard C. D. Brown,
• Marta Feroci,
• Fabrizio Vetica and
• Martina Bortolami

Beilstein J. Org. Chem. 2023, 19, 1966–1981, doi:10.3762/bjoc.19.147

• hexafluorophosphate (BMIm-PF6) as co-solvent with methanol and water to allow recycling of a phosphine-based Au(I) complex, as an efficient catalytic system for the hydration of terminal alkynes [87]. Moreover, the interesting properties of ILs have also been exploited to synthesize new solid polymeric catalysts for

• anion. Subsequently, we extended the method to different internal and terminal alkynes. Finally, we studied the reaction in the electrogenerated BF3/BMIm-BF4 system, comparing the results with those obtained with the chemical route (BF3·Et2O). Results and Discussion Optimization of the reaction

• diphenylacetylene (1a), affording the corresponding ketones in high yields after 5 h. Otherwise, terminal alkynes generally showed higher reactivity compared to internal ones. For all the studied terminal alkynes, only ketone products (Markovnikov) were obtained, excluding the formation of the anti-Markovnikov ones

Application of N-heterocyclic carbene–Cu(I) complexes as catalysts in organic synthesis: a review

• Nosheen Beig,
• Varsha Goyal and
• Raj K. Bansal

Beilstein J. Org. Chem. 2023, 19, 1408–1442, doi:10.3762/bjoc.19.102

• with alkynes under click chemistry conditions (Scheme 48) [15]. The products were obtained in high yields (93–99%). Cazin and co-workers systematically investigated the [3 + 2] cycloaddition of a series of six azides with seven terminal alkynes catalyzed by different 1,2,3-triazolylidene–CuCl complexes

One-pot nucleophilic substitution–double click reactions of biazides leading to functionalized bis(1,2,3-triazole) derivatives

• Hans-Ulrich Reissig and
• Fei Yu

Beilstein J. Org. Chem. 2023, 19, 1399–1407, doi:10.3762/bjoc.19.101

• azide was combined with a subsequent copper-catalyzed (3 + 2) cycloaddition with terminal alkynes. This one-pot process was developed with a simple model alkyne, but then applied to more complex alkynes bearing enantiopure 1,2-oxazinyl substituents. Hence, the precursor compounds 1,2-, 1,3- or 1,4-bis

Consecutive four-component synthesis of trisubstituted 3-iodoindoles by an alkynylation–cyclization–iodination–alkylation sequence

• Nadia Ledermann,
• Alae-Eddine Moubsit and
• Thomas J. J. Müller

Beilstein J. Org. Chem. 2023, 19, 1379–1385, doi:10.3762/bjoc.19.99

• generated by a consecutive four-component reaction starting from ortho-haloanilines, terminal alkynes, N-iodosuccinimide, and alkyl halides in yields of 11–69%. Initiated by a copper-free alkynylation, followed by a base-catalyzed cyclizive indole formation, electrophilic iodination, and finally

• to directly employ these standard conditions to the sequence of ortho-haloanilines 1, terminal alkynes 2, N-iodosuccinimide (3), and alkyl halides 4 to screen the scope of the one-pot synthesis of trisubstituted 3-iodoindoles 5 in a consecutive four-component fashion (Scheme 2). The sequence

Non-noble metal-catalyzed cross-dehydrogenation coupling (CDC) involving ether α-C(sp³)–H to construct C–C bonds

• Hui Yu and
• Feng Xu

Beilstein J. Org. Chem. 2023, 19, 1259–1288, doi:10.3762/bjoc.19.94

• terminal alkynes at room temperature (Scheme 15a) [67]. The ability to tune the reactivity of the trityl ion rationally improves the approach with excellent regio- and diastereoselectivity for the unsymmetric ethers. In 2018, Ye et al. reported a CDC reaction to form C(sp)–C(sp3) coupling products from

• -catalyzed formation of 1,1-bis-indolylmethane derivatives. Alkylation of coumarins and flavonoids. Direct CDC α-arylation of azoles with ethers. CDC of terminal alkynes with C(sp3)–H bonds adjacent to oxygen, sulfur or nitrogen atoms. Alkylation of terminal alkynes. Co-catalyzed functionalization of glycine

Pyridine C(sp²)–H bond functionalization under transition-metal and rare earth metal catalysis

• Haritha Sindhe,
• Malladi Mounika Reddy,
• Karthikeyan Rajkumar,
• Akshay Kamble,
• Amardeep Singh,
• Anand Kumar and
• Satyasheel Sharma

Beilstein J. Org. Chem. 2023, 19, 820–863, doi:10.3762/bjoc.19.62

• Heck cross-coupling [69][70]. However, researchers have developed various methods for the transition-metal-catalyzed C(sp2)–H olefination using various types of alkenes as coupling partners [71][72][73]. This part of the review covers reports for the alkenylation of pyridine with terminal alkynes

Synthesis, structure, and properties of switchable cross-conjugated 1,4-diaryl-1,3-butadiynes based on 1,8-bis(dimethylamino)naphthalene

• Semyon V. Tsybulin,
• Ekaterina A. Filatova,
• Alexander F. Pozharskii,
• Valery A. Ozeryanskii and
• Anna V. Gulevskaya

Beilstein J. Org. Chem. 2023, 19, 674–686, doi:10.3762/bjoc.19.49

• recrystallization of the crude product from ethanol. Next, the oxidative dimerization of terminal alkynes 6a–e was carried out in an aerobic medium in the CuI/TMEDA/iPr2NH system at room temperature, which proved to be effective in the synthesis of butadiynes 1–4 [15] (Scheme 3). The desired diarylbutadiynes 5a–e

Transition-metal-catalyzed domino reactions of strained bicyclic alkenes

• Austin Pounder,
• Eric Neufeld,
• Peter Myler and
• William Tam

Beilstein J. Org. Chem. 2023, 19, 487–540, doi:10.3762/bjoc.19.38

CuAAC-inspired synthesis of 1,2,3-triazole-bridged porphyrin conjugates: an overview

• Dileep Kumar Singh

Beilstein J. Org. Chem. 2023, 19, 349–379, doi:10.3762/bjoc.19.29

• connect a porphyrin with a chromophoric group. Among these, the copper(I)-catalyzed Huisgen 1,3-dipolar cycloaddition reaction [1][2] of azides with terminal alkynes is a popular and well established process to link a porphyrin with other moieties via 1,2,3-triazole group [3] (Figure 1). The term “click

• triazoloporphyrins 32a–c and triazole-bridged bisporphyrins 34 in good yields. The “click reaction” of azidoporphyrin 30 with the terminal alkynes 31a–c and 33 in a THF/water (3:1) mixture was investigated by using different catalytic systems. Among these, copper carbene (SIMes)CuBr proved to be a better catalyst

Group 13 exchange and transborylation in catalysis

• Dominic R. Willcox and
• Stephen P. Thomas

Beilstein J. Org. Chem. 2023, 19, 325–348, doi:10.3762/bjoc.19.28

• an ambiphilic aluminium precatalyst, (Me2N)C6H4AlMe2, Thomas et al. were able to shut down hydroalumination by the alane and catalyse the C–H borylation of terminal alkynes with HBpin (Scheme 21) [96]. Through kinetic analysis, it was found that the rate of the alkynyl-Bpin product formation was

• mechanistic proposal. Aluminium-catalysed hydroboration of alkenes and the proposed mechanism. Aluminium-catalysed C–H borylation of terminal alkynes and the proposed mechanism. Aluminium-catalysed dehydrocoupling of amines, alcohols, and thiols with H-B-9-BBN or HBpin and the proposed mechanism. Aluminium

Strategies to access the [5-8] bicyclic core encountered in the sesquiterpene, diterpene and sesterterpene series

• Cécile Alleman,
• Charlène Gadais,
• Laurent Legentil and
• François-Hugues Porée

Beilstein J. Org. Chem. 2023, 19, 245–281, doi:10.3762/bjoc.19.23

• ester. Finally, this latter was hydrolyzed or reduced to respectively provide albolic acid (178) and ceroplastol II (179). The scope of the reaction was also extended to various products containing the [X-8-5] tricyclic system (Figure 6). Several functionalized terminal alkynes succeeded in the Pauson

Sequential hydrozirconation/Pd-catalyzed cross coupling of acyl chlorides towards conjugated (2E,4E)-dienones

• Benedikt Kolb,
• Daniela Silva dos Santos,
• Sanja Krause,
• Anna Zens and
• Sabine Laschat

Beilstein J. Org. Chem. 2023, 19, 176–185, doi:10.3762/bjoc.19.17

• Crombie’s work on dienamides and prepared dienoates 15 by hydrozirconation of terminal alkynes 16 followed by Pd-catalyzed cross coupling with enoates 17 [55][56]. A repetitive approach gave rise to oligoenoates [57]. Hydrozirconations were also combined with carbonylations to install carbonyl groups. For

• example, the sequential hydrozirconation/carbonylation of propargylic ethers 18 reported by Donato [58] yielded α,β-unsaturated lactones 19. Beside the hydrozirconation/acylation sequence of nitriles utilizing acid chlorides published by Majoral/Floreancig [59][60], Cox revealed that terminal alkynes 16

• enone building blocks 23 for the synthesis of clifednamides [54][62]. The addition of Schwartz's reagent proceeds as a syn-addition affording (E)-alkenylzirconocenes 24 from terminal alkynes [28]. Based on these precedents from the literature, we surmised that it might be possible to establish a related

Scope of tetrazolo[1,5-a]quinoxalines in CuAAC reactions for the synthesis of triazoloquinoxalines, imidazoloquinoxalines, and rhenium complexes thereof

• Laura Holzhauer,
• Chloé Liagre,
• Olaf Fuhr,
• Nicole Jung and
• Stefan Bräse

Beilstein J. Org. Chem. 2022, 18, 1088–1099, doi:10.3762/bjoc.18.111

• , a small library of 1,2,3-triazole-substituted quinoxalines was synthesized applying the method of Chattopadhyay et al. [10] with minor adjustments. Altogether, a series of 21 different aliphatic and aromatic terminal alkynes were reacted with tetrazolo[1,5-a]quinoxaline and Cu(I) triflate as a

Synthesis of novel alkynyl imidazopyridinyl selenides: copper-catalyzed tandem selenation of selenium with 2-arylimidazo[1,2-a]pyridines and terminal alkynes

• Mio Matsumura,
• Kaho Tsukada,
• Kiwa Sugimoto,
• Yuki Murata and
• Shuji Yasuike

Beilstein J. Org. Chem. 2022, 18, 863–871, doi:10.3762/bjoc.18.87

• reaction between terminal alkynes and diimidazopyridinyl diselenides, generated from imidazo[1,2-a]pyridines and Se powder, using 10 mol % of CuI and 1,10-phenanthroline as the catalytic system under aerobic conditions. The C(sp2)–Se and C(sp)–Se bond-formation reaction can be performed in one-pot by using

• inexpensive and easy to handle Se powder as the Se source. The reaction proceeded with terminal alkynes having various substitutions, such as aryl, vinyl, and alkyl groups. The obtained alkynyl imidazopyridinyl selenide was found to undergo nucleophilic substitution reaction on Se atom using organolithium

• with an imidazo[1,2-a]pyridine ring, this study focused on the Cu-catalyzed one-pot C(sp2)–Se and C(sp)–Se bond formation for the synthesis of novel alkynyl imidazopyridinyl selenides using Se powder, 2-arylimidazo[1,2-a]pyridines, and terminal alkynes. Results and Discussion Synthesis of alkynyl

BINOL as a chiral element in mechanically interlocked molecules

• Matthias Krajnc and
• Jochen Niemeyer

Beilstein J. Org. Chem. 2022, 18, 508–523, doi:10.3762/bjoc.18.53

• treated with copper iodide to obtain the phenanthroline–Cu(I) complex (R)-8. A Glaser-type coupling with the terminal alkynes 9, followed by demetalation, proceeds smoothly in 78% yield. This furnishes the desired chiral rotaxane (R)-10, consisting of a BINOL-based macrocycle and a diyne thread. The CD

Synthesis of 3,4,5-trisubstituted isoxazoles in water via a [3 + 2]-cycloaddition of nitrile oxides and 1,3-diketones, β-ketoesters, or β-ketoamides

• Md Imran Hossain,
• Md Imdadul H. Khan,
• Seong Jong Kim and
• Hoang V. Le

Beilstein J. Org. Chem. 2022, 18, 446–458, doi:10.3762/bjoc.18.47

• cycloaddition of alkynes and nitrile oxides performed in organic solvents at elevated temperatures (Figure 1) [11][12][13][14][15][16]. In this method, while 3,5-disubstituted isoxazoles can be accessed from terminal alkynes, 3,4,5-trisubstituted isoxazoles require a high degree of substitution on non-terminal

• reaction proceed at room temperature and improve both the regioselectivity and yields of the isoxazoles. However, these catalysts only work for the reaction with terminal alkynes and only produce 3,5-disubstituted isoxazole products (Figure 1) [19][20]. The synthesis of 3,4,5-trisubstituted isoxazoles from

• highly substituted non-terminal alkynes does not proceed with copper catalysts at room temperature. As an alternative, the usage of ruthenium(II) catalysts enables the reaction to proceed smoothly at room temperature and produces high yields and regioselectivity for both, 3,5-disubstituted and 3,4,5

Menadione: a platform and a target to valuable compounds synthesis

• Acácio S. de Souza,
• Ruan Carlos B. Ribeiro,
• Dora C. S. Costa,
• Fernanda P. Pauli,
• David R. Pinho,
• Matheus G. de Moraes,
• Fernando de C. da Silva,
• Luana da S. M. Forezi and
• Vitor F. Ferreira

Beilstein J. Org. Chem. 2022, 18, 381–419, doi:10.3762/bjoc.18.43

• -LED light [111]. Under these conditions, menadione (10) and terminal alkynes 66 underwent a [2 + 2] cycloaddition reaction generating compounds containing cyclobutene rings (67a–c), that are important precursors in natural products syntheses. It is important to note that the choice of the blue-LED

Recent developments and trends in the iron- and cobalt-catalyzed Sonogashira reactions

• Surendran Amrutha,
• Sankaran Radhika and
• Gopinathan Anilkumar

Beilstein J. Org. Chem. 2022, 18, 262–285, doi:10.3762/bjoc.18.31

• steric effects. Anilkumar and co-workers reported an iron-catalyzed Sonogashira coupling of aryl iodides with terminal alkynes in the presence of a catalytic system made up of the greenest solvent, water, in the presence of 10 mol % FeCl3·6H2O and 20 mol % 1,10-phenanthroline as ligand under aerobic

• and co-workers reported a novel Fe-catalyzed cross-coupling for the arylation of terminal alkynes by using a combination of FeCl3 and N,N’-dimethylethylenediamine (dmeda) in catalytic amount [25]. A sample reaction in the absence of catalyst/ligand was also conducted, which yielded no desired product

• /hydroalkoxylation of alkynes was also reported (Scheme 8). Vogel and co-workers demonstrated the Sonogashira cross-coupling reaction of aryl iodides with terminal alkynes by utilizing cheap, non-toxic iron salts and copper iodide (Scheme 9) [26]. The reaction of 4-iodotoluene with phenylacetylene was chosen as the

Anomeric 1,2,3-triazole-linked sialic acid derivatives show selective inhibition towards a bacterial neuraminidase over a trypanosome trans-sialidase

• Peterson de Andrade,
• Sanaz Ahmadipour and
• Robert A. Field

Beilstein J. Org. Chem. 2022, 18, 208–216, doi:10.3762/bjoc.18.24

• (CuAAC, click chemistry), from α-azidosialic acid 1 and commercially available terminal alkynes (Figure 2B), and assessed their inhibitory activity towards TcTS and bacterial neuraminidase. Results and Discussion Synthesis of sialic acid derivatives A small series of anomeric 1,2,3-triazole-linked sialic

• 13C NMR experiment, where the α-anomer is a doublet and the β-anomer is a singlet [28]. The key intermediate 1 was further used in CuAAC reaction [29][30][31][32] with eleven (hetero)aromatic and non-aromatic terminal alkynes readily available in our lab [23]. Although CuAAC is reputedly tolerant of a

• 20 mol % excess of the terminal alkynes in a mixture of solvents (DMF/H2O 4:1) at 60 °C and Cu(I) generated in situ [33], but in catalytic amount. This approach resulted in the synthesis of eight 1,4-disubstituted 1,2,3-triazole derivatives (2a–h) in good yields (45–78%) and high purity. Other two

Iron-catalyzed domino coupling reactions of π-systems

• Austin Pounder and
• William Tam

Beilstein J. Org. Chem. 2021, 17, 2848–2893, doi:10.3762/bjoc.17.196

Electrocatalytic C(sp³)–H/C(sp)–H cross-coupling in continuous flow through TEMPO/copper relay catalysis

• Bin Guo and
• Hai-Chao Xu

Beilstein J. Org. Chem. 2021, 17, 2650–2656, doi:10.3762/bjoc.17.178

• terminal alkynes has been achieved in a continuous-flow microreactor through 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO)/copper relay catalysis. The reaction is easily scalable and requires low concentration of supporting electrolyte and no external chemical oxidants or ligands, providing straightforward

• ]. In this context, few methods have been developed for the dehydrogenative cross-coupling of tetrahydroisoquinolines with terminal alkynes because of the prevalence of the tetrahydroisoquinoline moiety in natural products and bioactive molecules [3][4][5][6][7][8][9][10]. These methods proceed through

• reaction of tetrahydroisoquinolines with terminal alkynes (Scheme 1C) [10]. The chiral ligand was found to be critical for the stereoinduction as well as product formation for these electrochemical reactions that are conducted in batch. Continuous-flow electrochemical microreactors offer several advantages

Visible-light-mediated copper photocatalysis for organic syntheses

• Yajing Zhang,
• Qian Wang,
• Zongsheng Yan,
• Donglai Ma and
• Yuguang Zheng

Beilstein J. Org. Chem. 2021, 17, 2520–2542, doi:10.3762/bjoc.17.169

• -catalyzed coupling reactions of terminal alkynes was published by Hwang and co-worker. In 2012, they [65] achieved a photoinitiated Sonogashira reaction using aryl halides (bromides and iodides) 20 and aryl- or alkylacetylenes 19. In control experiments, the replacement of the copper salt with palladium

• -forming reaction [74]. As a notable exception, in 2016, Hwang’s group [75] reported the novel synthesis of unsymmetrical 1,3-conjugated diynes 31 from terminal alkynes under LED irradiation. The reaction mechanism involved a bipolar heterodimeric copper phenylacetylide species that showed similar

• photophysical properties (Scheme 16). In 2019, Vlla’s group [76] explored the copper-catalyzed alkynylation of dihydroquinoxalin-2-ones 34 with terminal alkynes under irradiation. 4-Benzyl-3,4-dihydroquinoxalin-2(1H)-one 35 was subjected to an oxidation process with a CuII salt to generate a nitrogen radical